Neues Thema erstellenAntwort erstellen Seite 1 von 1   [ 4 Beiträge ]
AutorNachricht
 Betreff des Beitrags: gelöst - OSBIZ X8 - Sporadisch keine Verbindung zu OCAB
BeitragVerfasst: 31. Jul 2017, 10:15 

Registriert: 07.2017
Beiträge: 4
Geschlecht: nicht angegeben
Hallo zusammen,

wir haben bei einer hochgerüsteten X8 ein seltsames Problem - zu mir bisher unerklärten Zeiten(1-2x im Monat) "verliert" die OCC anscheindend die Verbindung zur OCAB.

Beobachtetete Symptome sind, dass z.B.
-Autoattendant auf der Zentrale nicht anspringt, stattdessen klingelt es im Nirvana - und
-Internen SIP-geräte bekommen keine Verbindung nach extern

>Direkte anrufe vom außen auf die (TDM-) Nebenstellen kommen durch.
>WBM zeigte beim letzten Fehler die UC Booster card als erreichbar an,
>direkter Aufruf der OCAB IP sagt normal "..use mainboard url"
>Aufruf der WBM UC-Suite zeigt keinen Inhalt (weißes Fenster)

Ein restart der OCAB hat keine Abhilfe geschaffen, ein kompletter Restart der Anlage schon.

Für Hilfe wäre ich sehr dankbar!

IP der Anlage: 193.3.131.211
IP OCAB: 193.3.131.223
SW-Version: osbiz_v2_R2.1.0_269
UC Booster Card Version: osbiz_v2_R2.1.0_269

Letzer Fehler war am 27.07.2017 - vermutlich ab 7:22Uhr
Logfiles zeigen z.B.

[messages OCC]
2017/07/27 07:02:08 alert ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb428c450 \"07/27/2017 07:02:08.546553\" E 0):
2017/07/27 07:02:08 alert ocsme user fp[4718]: EventType: Indeterminate
2017/07/27 07:02:08 alert ocsme user fp[4718]: EventCode: FP_EVT_CP_007
2017/07/27 07:02:08 alert ocsme user fp[4718]: EventText: 0xff C #20/7 0xff-0xff !Unknown event recevd: c30c0000009706010000
2017/07/27 07:05:24 alert ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb428c450 \"07/27/2017 07:05:24.674353\" E 0):
2017/07/27 07:05:24 alert ocsme user fp[4718]: EventType: Indeterminate
2017/07/27 07:05:24 alert ocsme user fp[4718]: EventCode: FP_EVT_CP_007
2017/07/27 07:05:24 alert ocsme user fp[4718]: EventText: 0xff C #20/7 0xff-0xff !Unknown event recevd: c30c002f009b06010000
2017/07/27 07:22:13 crit ocsme user ldh[4759]: EventLogEntry from TC [ldh:193.3.131.211] (0x971ff450 \"07/27/2017 07:22:13.965000\" TCStackThread.cpp 277):
2017/07/27 07:22:13 crit ocsme user ldh[4759]: EventType: Critical
2017/07/27 07:22:13 crit ocsme user ldh[4759]: EventCode: MSG_TC_SOCKET_ERROR
2017/07/27 07:22:13 crit ocsme user ldh[4759]: EventText: Socket error 0x19 at EPOLLERR
2017/07/27 07:22:13 err ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:22:13.989309\" E 0):
2017/07/27 07:22:13 err ocsme user fp[4718]: EventType: Minor
2017/07/27 07:22:13 err ocsme user fp[4718]: EventCode: FP_EVT_DH_004
2017/07/27 07:22:13 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0401000000042c050000
2017/07/27 07:22:14 crit ocsme user ldh[4759]: EventLogEntry from TC [ldh:193.3.131.211] (0x971ff450 \"07/27/2017 07:22:14.092481\" TCStackThread.cpp 277):
2017/07/27 07:22:14 crit ocsme user ldh[4759]: EventType: Critical
2017/07/27 07:22:14 crit ocsme user ldh[4759]: EventCode: MSG_TC_SOCKET_ERROR
2017/07/27 07:22:14 crit ocsme user ldh[4759]: EventText: Socket error 0x19 at EPOLLERR
2017/07/27 07:22:14 err ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:22:14.098293\" E 0):
2017/07/27 07:22:14 err ocsme user fp[4718]: EventType: Minor
2017/07/27 07:22:14 err ocsme user fp[4718]: EventCode: FP_EVT_DH_004
2017/07/27 07:22:14 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0400000000042c050000
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:22:17.180766\" E 0):
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventType: Cleared
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventCode: FP_EVT_DH_005
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventText: 0xff C #21/5 0-0xff !Port in service: 0400000000022c040000
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:22:17.905142\" E 0):
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventType: Cleared
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventCode: FP_EVT_DH_005
2017/07/27 07:22:17 notice ocsme user fp[4718]: EventText: 0xff C #21/5 0-0xff !Port in service: 0401000000022c040000
2017/07/27 07:23:04 crit ocsme user ldh[4759]: EventLogEntry from TC [ldh:193.3.131.211] (0x971ff450 \"07/27/2017 07:23:04.333129\" TCStackThread.cpp 277):
2017/07/27 07:23:04 crit ocsme user ldh[4759]: EventType: Critical
2017/07/27 07:23:04 crit ocsme user ldh[4759]: EventCode: MSG_TC_SOCKET_ERROR
2017/07/27 07:23:04 crit ocsme user ldh[4759]: EventText: Socket error 0x19 at EPOLLERR
2017/07/27 07:23:04 err ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:04.339737\" E 0):
2017/07/27 07:23:04 err ocsme user fp[4718]: EventType: Minor
2017/07/27 07:23:04 err ocsme user fp[4718]: EventCode: FP_EVT_DH_004
2017/07/27 07:23:04 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0402000000042c050000
2017/07/27 07:23:05 crit ocsme user ldh[4759]: EventLogEntry from TC [ldh:193.3.131.211] (0x971ff450 \"07/27/2017 07:23:05.612210\" TCStackThread.cpp 277):
2017/07/27 07:23:05 crit ocsme user ldh[4759]: EventType: Critical
2017/07/27 07:23:05 crit ocsme user ldh[4759]: EventCode: MSG_TC_SOCKET_ERROR
2017/07/27 07:23:05 crit ocsme user ldh[4759]: EventText: Socket error 0x19 at EPOLLERR
2017/07/27 07:23:05 err ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:05.618647\" E 0):
2017/07/27 07:23:05 err ocsme user fp[4718]: EventType: Minor
2017/07/27 07:23:05 err ocsme user fp[4718]: EventCode: FP_EVT_DH_004
2017/07/27 07:23:05 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0400000000042c050000
2017/07/27 07:23:06 crit ocsme user ldh[4759]: EventLogEntry from TC [ldh:193.3.131.211] (0x971ff450 \"07/27/2017 07:23:06.100775\" TCStackThread.cpp 277):
2017/07/27 07:23:06 crit ocsme user ldh[4759]: EventType: Critical
2017/07/27 07:23:06 crit ocsme user ldh[4759]: EventCode: MSG_TC_SOCKET_ERROR
2017/07/27 07:23:06 crit ocsme user ldh[4759]: EventText: Socket error 0x19 at EPOLLERR
2017/07/27 07:23:06 err ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:06.106674\" E 0):
2017/07/27 07:23:06 err ocsme user fp[4718]: EventType: Minor
2017/07/27 07:23:06 err ocsme user fp[4718]: EventCode: FP_EVT_DH_004
2017/07/27 07:23:06 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0401000000042c050000
2017/07/27 07:23:06 notice ocsme kern nfs: server ocab.local not responding, still trying
2017/07/27 07:23:07 notice ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:07.557986\" E 0):
2017/07/27 07:23:07 notice ocsme user fp[4718]: EventType: Cleared
2017/07/27 07:23:07 notice ocsme user fp[4718]: EventCode: FP_EVT_DH_005
2017/07/27 07:23:07 notice ocsme user fp[4718]: EventText: 0xff C #21/5 0-0xff !Port in service: 0402000000022c040000
2017/07/27 07:23:08 notice ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:08.685306\" E 0):
2017/07/27 07:23:08 notice ocsme user fp[4718]: EventType: Cleared
2017/07/27 07:23:08 notice ocsme user fp[4718]: EventCode: FP_EVT_DH_005
2017/07/27 07:23:08 notice ocsme user fp[4718]: EventText: 0xff C #21/5 0-0xff !Port in service: 0400000000022c040000
2017/07/27 07:23:09 notice ocsme user fp[4718]: EventLogEntry from FP_RECOVERY [fp:193.3.131.211] (0xb4a8c450 \"07/27/2017 07:23:09.230483\" E 0):
2017/07/27 07:23:09 notice ocsme user fp[4718]: EventType: Cleared
2017/07/27 07:23:09 notice ocsme user fp[4718]: EventCode: FP_EVT_DH_005
2017/07/27 07:23:09 notice ocsme user fp[4718]: EventText: 0xff C #21/5 0-0xff !Port in service: 0401000000022c040000


[messages ocab]
2017/07/27 07:21:39 err ocab user CSP[26165]: NodeID: (0): Name: Kunde XXX: CSTA-Link Interrupted
2017/07/27 07:21:39 notice ocab user CSP[26165]: ### Switch (0) Disconnected, trying to restart
2017/07/27 07:21:54 info ocab user CSP[26165]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:21:54 info ocab user CSP[26165]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:21:54 crit ocab user CSP[26165]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:21:54 err ocab user CSP[26165]: ### initiating Shutdown
2017/07/27 07:21:54 err ocab user CSP[26165]: ### OnAccept - Not connected, error
2017/07/27 07:21:54 err ocab user CMD[26199]: NodeID: (0): Name: Kunde XXX: CSTA-Link Interrupted
2017/07/27 07:21:55 info ocab user CMD[26199]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:21:55 info ocab user CMD[26199]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:21:55 crit ocab user CMD[26199]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:21:55 info ocab user CMD[26199]: ### Switch (0) Disconnected, Disconnected all clients
2017/07/27 07:21:56 err ocab user CMD[26199]: ### OnAccept - Not connected, error
2017/07/27 07:21:56 info ocab user mebmain: MwConfig: ### select() returns error, errno=9,db_socket=6
2017/07/27 07:21:56 info ocab user mebmain: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:21:57 notice ocab user CSP[26165]: Client CMD (3039824256) on IP 193.3.131.223 disconnected
2017/07/27 07:21:57 notice ocab user CSP[26165]: Client UC-Suite (3039840872) on IP 193.3.131.223 disconnected
2017/07/27 07:21:59 notice ocab daemon vsl_wait_hipath: Waiting for hipath DB...
2017/07/27 07:22:00 notice ocab user CSP[26165]: Stop CSP finished
2017/07/27 07:22:00 info ocab user CSP[26165]: CSP version 3.0.0.077 stopped
2017/07/27 07:22:01 info ocab user CMD[26199]: Stop CMD finished
2017/07/27 07:22:01 info ocab user CMD[26199]: CMD version 1.0.0.019 stopped
2017/07/27 07:22:19 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:22:39 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:22:59 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:23:19 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:23:39 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:23:59 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:24:11 alert ocab user cmdwatch[1314]: CMD lost, restarting.
2017/07/27 07:24:11 info ocab user CMD[1316]: starting CMD Version 1.0.0.019
2017/07/27 07:24:11 info ocab user CMD[1316]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:24:13 info ocab user CMD[1316]: Startup finished
2017/07/27 07:24:19 notice ocab daemon vsl_wait_hipath: Connected and ready.
2017/07/27 07:24:21 info ocab daemon OpenScapeOffice: OpenScapeOffice version 6.2.0.260OPriv built on Feb 8 2017 13:23:00 starting with PID = 1379
2017/07/27 07:24:21 alert ocab user cspwatch[1505]: CSP lost, restarting.
2017/07/27 07:24:22 info ocab user CSP[1507]: starting CSP Version 3.0.0.077
2017/07/27 07:24:22 info ocab user CSP[1507]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:24:24 notice ocab user CSP[1507]: Startup finished
2017/07/27 07:24:27 info ocab user CMD[1316]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:24:27 info ocab user CMD[1316]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:24:27 crit ocab user CMD[1316]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:24:27 err ocab user CMD[1316]: ### OnAccept - Not connected, error
2017/07/27 07:24:32 info ocab user CMD[1316]: Stop CMD finished
2017/07/27 07:24:33 info ocab user CMD[1316]: CMD version 1.0.0.019 stopped
2017/07/27 07:24:35 alert ocab user mebwatch[1576]: MEB lost, restarting.
2017/07/27 07:24:35 err ocab user SAGVIRTWAVE: SAGVirtWave build Jul 10 2015 12:22:09
2017/07/27 07:24:35 err ocab user SAGVIRTWAVE: set default trace level 9
2017/07/27 07:24:36 notice ocab daemon vsl_wait_hipath: Waiting for hipath DB...
2017/07/27 07:24:37 info ocab user CSP[1507]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:24:37 info ocab user CSP[1507]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:24:37 crit ocab user CSP[1507]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:24:38 err ocab user CSP[1507]: ### initiating Shutdown
2017/07/27 07:24:40 err ocab user CSP[1507]: ### OnAccept - Not connected, error
2017/07/27 07:24:43 notice ocab user CSP[1507]: Stop CSP finished
2017/07/27 07:24:44 info ocab user CSP[1507]: CSP version 3.0.0.077 stopped
2017/07/27 07:24:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:25:00 info ocab authpriv su[1655]: Successful su for vlc by root
2017/07/27 07:25:00 info ocab authpriv su[1655]: + ??? root:vlc
2017/07/27 07:25:00 info ocab authpriv su[1655]: pam_unix(su:session): session opened for user vlc by (uid=0)
2017/07/27 07:25:02 info ocab authpriv su[1655]: pam_unix(su:session): session closed for user vlc
2017/07/27 07:25:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:25:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:25:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:26:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:26:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:26:42 alert ocab user cspwatch[1985]: CSP lost, restarting.
2017/07/27 07:26:42 info ocab user CSP[1986]: starting CSP Version 3.0.0.077
2017/07/27 07:26:42 info ocab user CSP[1986]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:26:44 notice ocab user CSP[1986]: Startup finished
2017/07/27 07:26:47 notice ocab user CSP[1986]: CSTA established to NodeID (0) Name Kunde XXX
2017/07/27 07:26:47 notice ocab user CSP[1986]: Tracer Status Info: Max Queued Messages = 7 Present Queued Messages = 0 Max. used CTI-Tasks = 452 Present used CTI-Tasks = 108 Max. Sent Bytes = 195670 Max. Received Bytes = 24311
2017/07/27 07:26:52 alert ocab user cmdwatch[2034]: CMD lost, restarting.
2017/07/27 07:26:52 info ocab user CMD[2035]: starting CMD Version 1.0.0.019
2017/07/27 07:26:52 info ocab user CMD[2035]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:26:53 info ocab user CMD[2035]: Startup finished
2017/07/27 07:26:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:26:56 info ocab user mebmain: MwConfig: ### select() returns error, errno=9,db_socket=31
2017/07/27 07:26:56 info ocab user mebmain: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:26:57 info ocab user CSP[1986]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:26:57 info ocab user CSP[1986]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:26:57 crit ocab user CSP[1986]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:26:58 err ocab user CSP[1986]: ### initiating Shutdown
2017/07/27 07:27:00 err ocab user CSP[1986]: ### OnAccept - Not connected, error
2017/07/27 07:27:03 notice ocab user CSP[1986]: Stop CSP finished
2017/07/27 07:27:04 info ocab user CSP[1986]: CSP version 3.0.0.077 stopped
2017/07/27 07:27:07 info ocab user CMD[2035]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:27:07 info ocab user CMD[2035]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:27:07 crit ocab user CMD[2035]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:27:07 err ocab user CMD[2035]: ### OnAccept - Not connected, error
2017/07/27 07:27:12 info ocab user CMD[2035]: Stop CMD finished
2017/07/27 07:27:13 info ocab user CMD[2035]: CMD version 1.0.0.019 stopped
2017/07/27 07:27:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:27:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:27:38 info ocab authpriv su[2170]: Successful su for vlc by root
2017/07/27 07:27:38 info ocab authpriv su[2170]: + ??? root:vlc
2017/07/27 07:27:38 info ocab authpriv su[2170]: pam_unix(su:session): session opened for user vlc by (uid=0)
2017/07/27 07:27:41 info ocab authpriv su[2170]: pam_unix(su:session): session closed for user vlc
2017/07/27 07:27:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:28:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:28:22 alert ocab user cspwatch[2318]: CSP lost, restarting.
2017/07/27 07:28:22 info ocab user CSP[2319]: starting CSP Version 3.0.0.077
2017/07/27 07:28:22 info ocab user CSP[2319]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:28:24 notice ocab user CSP[2319]: Startup finished
2017/07/27 07:28:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:28:38 info ocab user CSP[2319]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:28:38 info ocab user CSP[2319]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:28:38 crit ocab user CSP[2319]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:28:38 err ocab user CSP[2319]: ### initiating Shutdown
2017/07/27 07:28:40 err ocab user CSP[2319]: ### OnAccept - Not connected, error
2017/07/27 07:28:44 notice ocab user CSP[2319]: Stop CSP finished
2017/07/27 07:28:44 info ocab user CSP[2319]: CSP version 3.0.0.077 stopped
2017/07/27 07:28:52 alert ocab user cmdwatch[2404]: CMD lost, restarting.
2017/07/27 07:28:52 info ocab user CMD[2405]: starting CMD Version 1.0.0.019
2017/07/27 07:28:52 info ocab user CMD[2405]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:28:54 info ocab user CMD[2405]: Startup finished
2017/07/27 07:28:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:29:07 info ocab user CMD[2405]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:29:07 info ocab user CMD[2405]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:29:07 crit ocab user CMD[2405]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:29:08 err ocab user CMD[2405]: ### OnAccept - Not connected, error
2017/07/27 07:29:13 info ocab user CMD[2405]: Stop CMD finished
2017/07/27 07:29:13 info ocab user CMD[2405]: CMD version 1.0.0.019 stopped
2017/07/27 07:29:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:29:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:29:52 alert ocab user cmdwatch[2587]: CMD lost, restarting.
2017/07/27 07:29:52 info ocab user CMD[2588]: starting CMD Version 1.0.0.019
2017/07/27 07:29:52 info ocab user CMD[2588]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:29:54 info ocab user CMD[2588]: Startup finished
2017/07/27 07:29:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:30:00 info ocab authpriv su[2616]: Successful su for vlc by root
2017/07/27 07:30:00 info ocab authpriv su[2616]: + ??? root:vlc
2017/07/27 07:30:00 info ocab authpriv su[2616]: pam_unix(su:session): session opened for user vlc by (uid=0)
2017/07/27 07:30:02 info ocab authpriv su[2616]: pam_unix(su:session): session closed for user vlc
2017/07/27 07:30:08 info ocab user CMD[2588]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:30:08 info ocab user CMD[2588]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:30:08 crit ocab user CMD[2588]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:30:08 err ocab user CMD[2588]: ### OnAccept - Not connected, error
2017/07/27 07:30:13 info ocab user CMD[2588]: Stop CMD finished
2017/07/27 07:30:14 info ocab user CMD[2588]: CMD version 1.0.0.019 stopped
2017/07/27 07:30:16 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:30:23 alert ocab user cspwatch[2725]: CSP lost, restarting.
2017/07/27 07:30:23 info ocab user CSP[2726]: starting CSP Version 3.0.0.077
2017/07/27 07:30:23 info ocab user CSP[2726]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:30:25 notice ocab user CSP[2726]: Startup finished
2017/07/27 07:30:36 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:30:38 info ocab user CSP[2726]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:30:38 info ocab user CSP[2726]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:30:38 crit ocab user CSP[2726]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:30:39 err ocab user CSP[2726]: ### initiating Shutdown
2017/07/27 07:30:41 err ocab user CSP[2726]: ### OnAccept - Not connected, error
2017/07/27 07:30:44 notice ocab user CSP[2726]: Stop CSP finished
2017/07/27 07:30:44 info ocab user CSP[2726]: CSP version 3.0.0.077 stopped
2017/07/27 07:30:56 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:31:13 alert ocab user cmdwatch[2870]: CMD lost, restarting.
2017/07/27 07:31:13 info ocab user CMD[2871]: starting CMD Version 1.0.0.019
2017/07/27 07:31:13 info ocab user CMD[2871]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:31:14 info ocab user CMD[2871]: Startup finished
2017/07/27 07:31:16 notice ocab daemon vsl_wait_hipath: Connected and ready.
2017/07/27 07:31:17 info ocab daemon OpenScapeOffice: OpenScapeOffice version 6.2.0.260OPriv built on Feb 8 2017 13:23:00 starting with PID = 2904
2017/07/27 07:31:23 alert ocab user cspwatch[3053]: CSP lost, restarting.
2017/07/27 07:31:23 info ocab user CSP[3056]: starting CSP Version 3.0.0.077
2017/07/27 07:31:23 info ocab user CSP[3056]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:31:26 notice ocab user CSP[3056]: Startup finished
2017/07/27 07:31:28 info ocab user CMD[2871]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:31:28 info ocab user CMD[2871]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:31:28 crit ocab user CMD[2871]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:31:28 err ocab user CMD[2871]: ### OnAccept - Not connected, error
2017/07/27 07:31:32 alert ocab user mebwatch[3160]: MEB lost, restarting.
2017/07/27 07:31:32 err ocab user SAGVIRTWAVE: SAGVirtWave build Jul 10 2015 12:22:09
2017/07/27 07:31:32 err ocab user SAGVIRTWAVE: set default trace level 9
2017/07/27 07:31:33 info ocab user CMD[2871]: Stop CMD finished
2017/07/27 07:31:34 info ocab user CMD[2871]: CMD version 1.0.0.019 stopped
2017/07/27 07:31:39 info ocab user CSP[3056]: MwConfig: ### select() returns error, errno=9,db_socket=9
2017/07/27 07:31:39 info ocab user CSP[3056]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:31:39 crit ocab user CSP[3056]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:31:40 err ocab user CSP[3056]: ### initiating Shutdown
2017/07/27 07:31:42 err ocab user CSP[3056]: ### OnAccept - Not connected, error
2017/07/27 07:31:45 notice ocab user CSP[3056]: Stop CSP finished
2017/07/27 07:31:46 info ocab user CSP[3056]: CSP version 3.0.0.077 stopped
2017/07/27 07:31:46 notice ocab daemon vsl_wait_hipath: Waiting for hipath DB...
2017/07/27 07:31:53 alert ocab user cmdwatch[3288]: CMD lost, restarting.
2017/07/27 07:31:53 info ocab user CMD[3290]: starting CMD Version 1.0.0.019
2017/07/27 07:31:53 info ocab user CMD[3290]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:31:54 info ocab user CMD[3290]: Startup finished
2017/07/27 07:32:06 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:32:08 info ocab user mebmain: MwConfig: ### select() returns error, errno=9,db_socket=10
2017/07/27 07:32:08 info ocab user mebmain: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:32:08 info ocab user CMD[3290]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:32:08 info ocab user CMD[3290]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:32:08 crit ocab user CMD[3290]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:32:08 err ocab user CMD[3290]: ### OnAccept - Not connected, error
2017/07/27 07:32:14 info ocab user CMD[3290]: Stop CMD finished
2017/07/27 07:32:14 info ocab user CMD[3290]: CMD version 1.0.0.019 stopped
2017/07/27 07:32:24 alert ocab user cspwatch[3413]: CSP lost, restarting.
2017/07/27 07:32:24 info ocab user CSP[3414]: starting CSP Version 3.0.0.077
2017/07/27 07:32:24 info ocab user CSP[3414]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:32:25 notice ocab user CSP[3414]: Startup finished
2017/07/27 07:32:26 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:32:39 info ocab user CSP[3414]: MwConfig: ### select() returns error, errno=9,db_socket=7
2017/07/27 07:32:39 info ocab user CSP[3414]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:32:39 crit ocab user CSP[3414]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:32:39 err ocab user CSP[3414]: ### initiating Shutdown
2017/07/27 07:32:41 err ocab user CSP[3414]: ### OnAccept - Not connected, error
2017/07/27 07:32:45 notice ocab user CSP[3414]: Stop CSP finished
2017/07/27 07:32:45 info ocab user CSP[3414]: CSP version 3.0.0.077 stopped
2017/07/27 07:32:46 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:33:06 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:33:26 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:33:44 alert ocab user cspwatch[3655]: CSP lost, restarting.
2017/07/27 07:33:44 info ocab user CSP[3656]: starting CSP Version 3.0.0.077
2017/07/27 07:33:44 info ocab user CSP[3656]: Starting CSP on Console, logfile (csptrace)
2017/07/27 07:33:46 notice ocab user CSP[3656]: Startup finished
2017/07/27 07:33:46 notice ocab daemon vsl_wait_hipath: Connected and ready.
2017/07/27 07:33:47 info ocab daemon OpenScapeOffice: OpenScapeOffice version 6.2.0.260OPriv built on Feb 8 2017 13:23:00 starting with PID = 3685
2017/07/27 07:33:49 notice ocab user CSP[3656]: CSTA established to NodeID (0) Name Kunde XXX
2017/07/27 07:33:49 notice ocab user CSP[3656]: Tracer Status Info: Max Queued Messages = 7 Present Queued Messages = 0 Max. used CTI-Tasks = 452 Present used CTI-Tasks = 136 Max. Sent Bytes = 195670 Max. Received Bytes = 24311
2017/07/27 07:33:54 alert ocab user cmdwatch[3835]: CMD lost, restarting.
2017/07/27 07:33:54 info ocab user CMD[3837]: starting CMD Version 1.0.0.019
2017/07/27 07:33:54 info ocab user CMD[3837]: Starting CMD on Console, logfile (cmdtrace)
2017/07/27 07:33:55 info ocab user CMD[3837]: Startup finished
2017/07/27 07:33:57 info ocab user CSP[3656]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:33:57 info ocab user CSP[3656]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:33:57 crit ocab user CSP[3656]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:33:58 err ocab user CSP[3656]: ### initiating Shutdown
2017/07/27 07:34:02 err ocab user CSP[3656]: ### OnAccept - Not connected, error
2017/07/27 07:34:03 notice ocab user CSP[3656]: Stop CSP finished
2017/07/27 07:34:04 info ocab user CSP[3656]: CSP version 3.0.0.077 stopped
2017/07/27 07:34:04 notice ocab daemon vsl_wait_hipath: Waiting for hipath DB...
2017/07/27 07:34:08 alert ocab user mebwatch[4012]: MEB lost, restarting.
2017/07/27 07:34:08 err ocab user SAGVIRTWAVE: SAGVirtWave build Jul 10 2015 12:22:09
2017/07/27 07:34:08 err ocab user SAGVIRTWAVE: set default trace level 9
2017/07/27 07:34:09 info ocab user CMD[3837]: MwConfig: ### select() returns error, errno=9,db_socket=8
2017/07/27 07:34:09 info ocab user CMD[3837]: MwConfig: ### Worker thread: select() returns error, restart of Middleware initiated to resync
2017/07/27 07:34:09 crit ocab user CMD[3837]: ### sigCatcher received signal 15, stopping...
2017/07/27 07:34:09 err ocab user CMD[3837]: ### OnAccept - Not connected, error
2017/07/27 07:34:15 info ocab user CMD[3837]: Stop CMD finished
2017/07/27 07:34:15 info ocab user CMD[3837]: CMD version 1.0.0.019 stopped
2017/07/27 07:34:24 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.
2017/07/27 07:34:44 notice ocab daemon vsl_wait_hipath: 193.3.131.211: Licensing not yet ready.


Zuletzt geändert von danimax am 19. Sep 2017, 09:54, insgesamt 2-mal geändert.

Nach oben
 Profil  
 
 Betreff des Beitrags: Re: OSBIZ X8 - Sporadisch keine Verbindung zu OCAB
BeitragVerfasst: 31. Jul 2017, 10:47 

Registriert: 07.2017
Beiträge: 4
Geschlecht: nicht angegeben
achso: ich wollte mir den Publikumsjoker nicht kaputt machen, aber vieleicht sollte ich meine Gedanken dazu noch schreiben:

So wie ich das sehe - gibt es am Switch/-Port ein Problem, weshalb die Verbindung fehl schlägt.

>2017/07/27 07:23:04 err ocsme user fp[4718]: EventText: 0xff C #21/4 0-0xff !Port out of service: 0402000000042c050000
>2017/07/27 07:23:06 notice ocsme kern nfs: server ocab.local not responding, still trying
>2017/07/27 07:38:58 warning ocab user CMD[5237]: NodeID (0) Name (Kunde XXX) Switch did not reply to AARQ - Disconnect and retry

>Kann das jemand bestätigen/wiederlegen?

Danke vorab für jeden der Mitdenken hilft.


Nach oben
 Profil  
 
 Betreff des Beitrags: Re: OSBIZ X8 - Sporadisch keine Verbindung zu OCAB
BeitragVerfasst: 16. Sep 2017, 08:12 

Registriert: 02.2016
Beiträge: 49
Geschlecht: nicht angegeben
Hallo,
prüfe doch mal was die Logs vom Switch sagen. Hätte jetzt ein ähnliches Problem.
Kunde hatte ein Cisco 2960 leider gab es kein Zugriff. Hab ein HP2530 eingebaut und die Eth Ports
Auf der TK auf 100FDX eingestellt die Counter auf dem Switch sind fehlerfrei.
Die myPortal / myAgent Anmeldung sowie das Web IF sind schneller wie mit dem Cisco,

Das log sah vorher so aus:

2017/08/30  10:37:11  info     ocab    kern     IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2017/08/30  10:37:11  err      ocab    kern     eth2: tbiphy initialized for SGMII
2017/08/30  10:37:11  debug ocab    kern     fsl-gianfar ffe25000.ethernet eth2: Could not allocate BDs to SRAM, fallback to DDR
2017/08/30  10:37:11  info     ocab    kern     IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2017/08/30  10:37:11  info     ocab    kern     libphy: mdio@ffe24520:11 - Link is Up - 1000/Full
2017/08/30  10:37:11  info     ocab    kern     IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
 
2017/08/30  10:39:07  info     ocab    kern     libphy: mdio@ffe24520:11 - Link is Down
2017/08/30  10:39:10  info     ocab    kern     libphy: mdio@ffe24520:11 - Link is Up - 100/Full

vielleicht hilft das weiter

_________________
------------------------------------------------------------------------------------------------------------------------
TK: Unify OSBiz X3R mit Telekom SIP
Internet: VDSL 50 an Sophos SG
Videoüberwachung: Trendnet / QNAP
KNX-System: Gira / Hager Domovea


Nach oben
 Profil  
 
 Betreff des Beitrags: Re: OSBIZ X8 - Sporadisch keine Verbindung zu OCAB
BeitragVerfasst: 19. Sep 2017, 09:48 

Registriert: 07.2017
Beiträge: 4
Geschlecht: nicht angegeben
danke - tatsächlich gab es einen defekten switch und zusätzlich sporadisch ein IP Konflikt. (IT Vor Ort war leider wenig hilfsbereit - wir mussten(durften) es erst nach langem hin und her prüfen.)

- jetz läuft alles brav wie zuvor - :)


Nach oben
 Profil  
 
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Neues Thema erstellenAntwort erstellen Seite 1 von 1  [ 4 Beiträge ]


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Suche nach:
Gehe zu:  
cron


© phpBB® Forum Software » Style by Daniel St. Jules Gamexe.net | phpBB3 Forum von phpBB8.de